Product Classification

 

ꁆ ꁇ

3-pin plug-in vertical red button power toggle switch HY-205DSJ

toggle switch is to turn on or off the circuit by turning the switch handle, so as to achieve the purpose of switching the circuit.

slide switch

 

slide switches are used to control the flow of current in an electrical circuit, typically using a mechanical slider to turn the current on and off by sliding between on and off states. It is very suitable for controlling the current in smaller circuits. Slide switches are common as the main power switch in small battery-powered electrical devices.

slide switch is a bistable two-position switch used to control the current in the circuit. It can be turned off or interrupted by moving the switch.

Professional Slide Switch Manufacturer

Homyet Parts is one of the experienced slide switch manufacturers in China. We focus on designing and manufacturing micro slide switches and micro slide switches. We have perfect after-sales service and technical support. We are now building trust relationships with customers from more than 36 countries and regions. Looking forward to your cooperation!

Slide Switch Product Documentation

Test Report-Slide Switches HOMYET.pdf

environmental certificate-SLIDE SWITCH.pdf

Slide Switches SPECIFCATION.pdf

slide switch

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

  • Product Description

 

function:

100% brand new and high quality.

Easy to install and use.

Simple structure, mini body,

toggle switch is to turn on or off the circuit by turning the switch handle, so as to achieve the purpose of switching the circuit. The commonly used varieties of toggle switch are single-pole double position, single-pole three position, double-pole double position and double-pole three position, etc. They are generally used in low-voltage circuits and have the characteristics of flexible slider action and stable and reliable performance. Toggle switches are mainly used in various instruments/equipment, various electric toys, fax machines, audio equipment, medical equipment, beauty equipment, and other electronic products.

 

specifications:

Products Name: Slide Switch

model: HY-205DSJ

rating: 125V DC,6A (effective value)

Contact Resistance:≤100mΩ Insulation Resistance:≥100MΩ

Dielectric voltage proof:100V AC(50HZ or 60HZ)/1min

Operating Force:200±50gf

Operation life:Average fault-free life 10,000 times

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

Specifications

 

Test Requirements and Procedures

 

Practical temperature range

-16 ℃- +60 ℃. (Normal humidity, normal air pressure)

 

Storage Temperature Range

 

-20 ℃ ~ 65 ℃ (normal humidity and pressure)

 

Item

Test Conditions

Performance

Terminal

strength

Static load of 300gf shall be applied

to terminal for 15 seconds. in any direction

Electrical characteristics

shall satisfy

or

 

terminal.

displacement

 

(knob)

static load of 10 N (1Kgf)

shall apply

the actuator (KNOD), then

displacement shall be

direction measured

the arrow.

leverage should be no serious

deformation, normal function.

life test

No-load Endurance:

switch shall withstand 10,000

cycles, speed of 15~18 cycles

PERminutes without loading.

(1) Contact resistance max. 100mΩ.

(2) Insulation resistance 50MΩ

MIN.

(3) withstand voltage

AC 500V,1 minute AC 500V 1 minute

(4) Operating force ± 30% initial

.

(5) No damaged parts arc or

failure, etc.

Welding capability test

terminal shall be

Immersed in a solder bath of 230±2mm

10 ℃ for 2±0.5 seconds.

welding area.

should be above 75%.

right

welding heat test

welding bath method:

Welding temperature 250±10 ℃

soaking time 2±0.5 seconds soaking

the depth of the board

Printed Wiring Board Thickness

assembly hole shall comply

this specification.

No deformation of the shell or environment

teinals electrical loosening

characteristics.

Humidity

test

switches shall be stored at 40 ±

2 ℃, humidity 90% to 95%, for 96 hours. Then

switch should be kept in standard

1 hour

measurement.

shall not have

deformation or crack

.

 

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

certificate, packing and transportation

 

Slide Switches SPECIFCATION.pdf

environmental certificate-SLIDE SWITCH.pdf

Test Report-Slide Switch + homyet.pdf

 

 

 

 

 

 

 

Packaging and Transportation

 

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

 

 

  • ●you don't know the main application of sliding dimmer switch
  • ●Tactile Switches for Everything
  • ●Type-C Explained: What is Type-C and Why
ꄴPrevious： 6-pin plug-in vertical red button power toggle switch HY-201LJDLM
ꄲNext： 3-pin plug-in horizontal bending needle red button power toggle switch HY-205DSJW-A