-
ꁇTYPE-C
-
ꁇTACT SWITCH
-
DETECTORSWITCH
-
ꁇPHONE JACK
-
ꁇSLIDE SWITCH
-
ꁇDC&AC JACK
-
ꁇUSB
-
ꁇCONNECTOR
-
ꁇCARD
-
ꁇHDMI
-
ꁇMOTOR
-
ꁇPUSH SWITCH
-
ꁇBATTERY
-
ꁇRJ45
-
ROCKER SWITCH
-
ꁇD-SUB
-
RCA JACK
-
POGO PIN
-
SMA
-
ꁇMINI DIN
-
SWITCH CAP
-
OPTICALFIBER
-
POTENTIOMETER
-
WP PUSHTERMINAL
-
DIP SWITCH
-
KDC SWITCH
-
VGA
-
RF
-
SCART
-
ENCODER
-
TERMINALBLOCK
-
XLR
-
CELLBATTERY
-
MICRO SWITCH
-
FPC CABLE
-
GX
5.8 * 5.8 single row 3-pin flat head key switch self lock / no lock switch HY-D58PZS
slide switch
slide switches are used to control the flow of current in an electrical circuit, typically using a mechanical slider to turn the current on and off by sliding between on and off states. It is very suitable for controlling the current in smaller circuits. Slide switches are common as the main power switch in small battery-powered electrical devices.
slide switch is a bistable two-position switch used to control the current in the circuit. It can be turned off or interrupted by moving the switch.
Professional Slide Switch Manufacturer
Homyet Parts is one of the experienced slide switch manufacturers in China. We focus on designing and manufacturing micro slide switches and micro slide switches. We have perfect after-sales service and technical support. We are now building trust relationships with customers from more than 36 countries and regions. Looking forward to your cooperation!
Slide Switch Product Documentation
Test Report-Slide Switches HOMYET.pdf
environmental certificate-SLIDE SWITCH.pdf
Slide Switches SPECIFCATION.pdf
slide switch
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
- Product Description
function:
100% brand new and high quality.
Easy to install and use.
Simple structure, mini body,
toggle switch is to turn on or off the circuit by turning the switch handle, so as to achieve the purpose of switching the circuit. The commonly used varieties of toggle switch are single-pole double position, single-pole three position, double-pole double position and double-pole three position, etc. They are generally used in low-voltage circuits and have the characteristics of flexible slider action and stable and reliable performance. Toggle switches are mainly used in various instruments/equipment, various electric toys, fax machines, audio equipment, medical equipment, beauty equipment, and other electronic products.
specifications:
Products Name: Slide Switch
model:HY-D58PZS
rating: 125V DC,6A (effective value)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Specifications
Test Requirements and Procedures
Practical temperature range
-16 ℃- +60 ℃. (Normal humidity, normal air pressure)
Storage Temperature Range
-20 ℃ ~ 65 ℃ (normal humidity and pressure)
|
Item |
Test Conditions |
Performance |
|
Terminal strength |
Static load of 300gf shall be applied to terminal for 15 seconds. in any direction |
Electrical characteristics shall satisfy no damage or
terminal. |
|
displacement
(knob) |
static load of 10 N (1Kgf) shall apply the actuator (KNOD), then displacement shall be direction measured the arrow. |
leverage should be no serious deformation, normal function. |
|
life test |
No-load Endurance: switch shall withstand 10,000 cycles, speed of 15~18 cycles PERminutes without loading. |
(1) Contact resistance max. 100mΩ. (2) Insulation resistance 50MΩ MIN. (3) withstand voltage AC 500V,1 minute AC 500V 1 minute (4) Operating force ± 30% initial . (5) No damaged parts arc or failure, etc. |
|
Welding capability test |
terminal shall be Immersed in a solder bath of 230±2mm 10 ℃ for 2±0.5 seconds. |
welding area. should be above 75%. |
|
right welding heat test |
welding bath method: Welding temperature 250±10 ℃ soaking time 2±0.5 seconds soaking the depth of the board Printed Wiring Board Thickness assembly hole shall comply this specification. |
No deformation of the shell or environment teinals electrical loosening characteristics. |
|
Humidity test |
switches shall be stored at 40 ± 2 ℃, humidity 90% to 95%, for 96 hours. Then switch should be kept in standard 1 hour measurement. |
shall not have deformation or crack . |
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
certificate, packing and transportation
Slide Switches SPECIFCATION.pdf
environmental certificate-SLIDE SWITCH.pdf
Test Report-Slide Switch + homyet.pdf
| Packaging and Transportation |
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
- ●you don't know the main application of sliding dimmer switch
- ●Tactile Switches for Everything
- ●Type-C Explained: What is Type-C and Why
