Product Classification

 

ꁆ ꁇ

9p dsub signal interface socket with hole DSUB-01H

RJ45 consists of plug and socket. A connector consisting of these two components is connected between the wires to achieve electrical continuity of the wires.

D-SUB

 

D-sub connectors, also known as D-subminiature, are a common type of electrical connector. Widely used in communication and early pc plug and socket series. They are named for their characteristic D-shaped metal shield. When they were introduced, D-sub were among the smallest connectors used on computer systems. The most common are DB25 and DE9. Typical applications on personal computers are VGA (DA15 female), parallel port (DB25 female), com serial port (de9 male). There are dozens of different types of D-sub connectors, and they can be classified in many ways, including by the connection method and the number of pins or jacks. These are the two parts of the D-sub, male and female types, please browse and find the one that suits you!

  •  

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

Product Description

 

function:

D-sub only describes the connection structure and does not define the entire interface or the function of all pins. The most common are DB25 and DE9. Typical applications on personal computers are VGA (DA15 female), parallel port (DB25 female), com serial port (de9 male). These interfaces are being replaced by DVI, HDMI, RJ45 Ethernet ports and USB. After the popularity of personal computers, de9 was misread as db9. Over time, DB9 became an alias for de9. Other D-sub of the pin number are the same. DB is used more now.

 

 

specifications:

Product Name: D-SUB

model: DSUB-01H

 

 

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

Specifications

 

D-SUB Specifications

 

technical parameters

Electrical characteristics

A. Contact resistance: ≤ 15mΩ

B. Rated current: 5A

C. withstand voltage: 1000V

D. Insulation resistance: ≥ 5000mΩ

material and surface treatment

A. Pin Material and Coating: Brass

B. Plastic material: PBT

working environment temperature: - 40 ℃ ~ +100 ℃

Material Introduction

Packaging and storage

A. logo: trademark (code or logo) and date of manufacture

manufacturer should indicate on the product tb. Packing: The packing box shall be marked with the manufacturer,

product name, model, quantity, production date, moisture-proof,

handle with care. should be in

the mouth of the box. A certificate is affixed to the box,

shall indicate: manufacturer, product name, model,

quantity, inspection department mark, inspection date.

C. Transportation: The packaged product can be passed through any

transportation not directly affected by rain

snow.

D. Storage: Packaged products should be stored in warehouses

ambient temperature is -10 ℃ ~ +40 ℃, the relative

The humidity does not exceed 80%, and there is no acid, alkaline or

other corrosive gases in the surrounding air.

Product Environmental Information

ROS compliance;

exemption (subject to EU exemption)

technology: lead-free

 

 

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

Certificate

 

D-SUB specification. Pdf

ꄴPrevious： Black glue plug 9p plug dsub horizontal plug female seat DB9-HDR-F
ꄲNext： DB 9P female soldered D-SUB connector HY-DB9FBL01