SMA RF pedestal gold plated micro antenna pedestal SMA-C-101

SMA

SMA connector is a semi-precision miniature RF and microwave connector that is widely used, especially for RF connections in electronic systems with frequencies up to 18 GHz and beyond.

SMA connectors are available in a variety of formats, male, female, straight, right angle, bulkhead fittings, etc., making it possible to meet most requirements. Its ultra-miniature size also allows it to be used, even in relatively small electronic devices.

Although it is now well established, SMA connectors may see their use expanded, as many new RF systems see their operating frequencies well extended into the microwave region.

Our MRF series products are compatible with I-PEX's MHF plug and socket products, HRS's U.FL and W.FL series products and ECT's USS RF series products in terms of electrical, mechanical and environmental performance.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Product Description

function:

100% brand new and high quality.

Easy to install and use.

simple structure, body mini,

SMA is an abbreviation for sub-miniature-a. The full name of SMA antenna interface of ordinary wireless routing/wireless network card shall be SMA reverse polarity male head, I .e. the antenna connector is internally threaded and the internal contact is pin (one end of the wireless device is externally threaded and the internal contact is tube). Wireless devices with such an interface are the most popular. More than 70% of APs, wireless routing and more than 90% of PCI interface wireless network cards use this interface. The size of this interface is moderate. There are many hand-held walkie-talkies and other devices of this type, but the pins and tubes inside are the opposite of those of standard SMA wireless devices.

SMA connector is a miniature connector that can be used up to 18GHz / 26.5GHz. It has high mechanical strength, high durability, high reliability and low VSWR. SMA connectors are the best choice for a variety of microcircuits, including sealing structures. SMA connectors can be used in a variety of situations. For example, measurement and testing, mobile communication, electronic equipment, etc.

specifications:

Product Name: SMA

model: SMA-C-101

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Specifications

[main application]]

Wireless LAN Antenna

●mobile phone

●Laptop

●Game Equipment

●digital appliances

●access point

Key Features]

●SMT socket and mating plug cable connector.

●Small profile and low profile: 1.2mm to 2.5mm maximum fit height.

●applicable cable: OD 0.81mm/1.13mm/1.32mm/1.37mm and 1.8mm coaxial cable.

●High productivity: Easy cable termination.

●applicable technologies: IEEE802.11 a/B/g/n; UWB; WiMAX ;Burst ; Zigbee; Bluetooth wireless and MIMO.

[specification]]

●Frequency range: DC to 6GHz 0.1~3GHz is 1.3max,3~6GHz is 1.4MAX

●characteristic impedance: 50Ω (nominal value)

●temperature: -40 ℃ to 85 ℃

●rated voltage: AC 60V

●contact resistance: 20 mΩ max.(signal) and 10 mΩ max.(ground)

●withstand voltage: AC 200V

●insulation resistance: 500mΩ min./DC100V

Compatibility]Our MRF series products are compatible with I-PEX's MHF plug and socket products, HRS's U.FL and W.FL series products and ECT's USS RF series products in terms of electrical, mechanical and environmental performance.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Certificate

SMA specification. Pdf

ꄴPrevious： Gold Plated 4-pin SMA RF base for splint SMA plug-in SMA-07

ꄲNext： SMA RF Base Gold Plated WiFi Micro Antenna Base 4 Generation IPEX-04-H0.6