S-terminal connector vertical patch 8p connector female base MDS-707A

S-terminal (English: S-Video), where s is short for "separate. Also known as Y / C (or, incorrectly, s-vhs or "super video"). It is an analog signal that divides the video data into two separate signals (luminance and chrominance) for transmission. Unlike composite video, it packs all signals into a whole and sends them.

Mini DIN

Mini-DIN connectors are used for S-video connections, PS/2 mice and keyboards, and some other applications. Both DIN and mini-DIN connectors are held in place by the friction of the connector body and the pins.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Product Description

function:

100% brand new and high quality.

Easy to install and use.

simple structure, body mini,

S-VI deo terminal, also known as optical color separation terminal, is a professional video standard interface that only transmits video signals and has nothing to do with audio. S does not mean separation. The chrominance signal C and the luminance signal Y of the video signal are separately transmitted in different channels, thereby reducing the "separation" and "synthesis" processes in the image transmission process, reducing the loss in the conversion process, and reducing the mutual interference between the signals, And reduce the mutual interference between the luminance and chrominance in the output of the video program to obtain a better display effect. At present, the most widely used s terminal interface has better output effect.

specifications:

Product Name: MINI DIN

model: MDS-707A

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Specifications

Mini DIN Specifications

practical temperature range:

-25 ℃ ~ +70 ℃ (normal humidity and pressure)

Itrm	Test Conditions	demand
terminal strength	Apply a static load of 5N for 10 seconds, pull in all directions on the front of the terminal	, but acceptable deformation
Solderab-ility	Put the front part of the joint into the welding rod. Welding temperature: 235±5 ℃. Soaking time: 30. 5s immersion depth does not exceed 1/2 thickness of P C.	Pollutant area ≥ 90% Soldingfluxmust flow PCboardsurface
	put the terminal into tl 6mmP C. Plate and wire welding temperature: 255±5 ℃ soaking time: 5 S	No damage, deformation and abnormal contact
Humidity Test	placed at a temperature of 40±2°C and a humidity of 90-95%. The temperature and humidity were 96 hours. After 24 hours of testing, the test was carried out at temperature and humidity.	insulation resistance: ≥ 10MΩ contact information: ≤ 30mΩ voltage: 300VAC / min
Saltmisttest	Put the product into a salt spray box with a temperature of 35±2°C, and spray the sodium chloride solution as a 5% ± 0.1% spray. 8 hours, then wash with water to observe	parts should not exceed
Temperature cycle test	placed in an incubator at a temperature of -25±2°C for 30 minutes, and then converted to 70±2±30 minutes. Through 5 cycles, test for 2 hours under temperature and humidity	insulation resistance: ≥ 100MΩ with voltage 500vac/min
life test	pull and push 1000 times, 10-18 times/minute	Contactresi stance:≤ 50mΩ

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Certificate

Mini DIN SPECIFCATION.pdf

ꄴPrevious： 8-core vertical Mini DIN control board interface connector base MDS-807A

ꄲNext： MPC terminal copper male s terminal line end plug MPC-M4-P01