Product Classification

 

RJ45 network interface 59 full plastic 10P8C network port socket 1 * 5P five connections RJ45-59-5P01

RJ45 consists of plug and socket. A connector consisting of these two components is connected between the wires to achieve electrical continuity of the wires.

RJ45

 

RJ45 is an information jack (I. e., communication terminal) connector in a wiring system. The connector consists of a plug (connector, crystal head) and a socket (module). The plug has 8 recesses and 8 contacts. RJ is an abbreviation of the Registered Jack, which means "registered socket".

Homyet Parts offers a wide range of RJ45 connectors, you can browse our products and request samples.

  •  

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

Product Description

 

function:

100% brand new and high quality.

Easy to install and use.

simple structure, body mini,

RJ45 is a kind of connector of information socket (communication socket) in wiring system. The connector consists of a plug (connector, crystal head) and a socket (module). The plug has 8 recesses and 8 contacts. RJ is an abbreviation of the registered jack, which means "registered socket". In the FCC (Federal Communications Commission Standards and Regulations), RJ is the interface for public telecommunications networks, while RJ45 for computer networks is the generic name for the standard 8-bit modular interface.

Distinguish RJ11

in the home ADSL modem, there will be an RJ11 interface, which is slightly smaller than the RJ45 interface and is mainly used to connect telephone lines.

classification

According to the installation position of the RJ45 module, it can be divided into four types: embedded, carpet, desktop and general-purpose

According to the shielding performance, it can be divided into unshielded modules and shielded modules. When installing a shielded cable system, the entire link must be shielded, including cables and connectors, and the shielded information module is required.

 

 

specifications:

Product Name: RJ45

model: RJ45-59-5P01

 

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

 

Specifications

 

RJ45 Specifications

 

contact current rating: 1.5 amps minimum.

 

temperature range: -25 ℃ ~ +85 ℃

 

 

Item Test Conditions demand

welding ability

Immersion Connector

3 ±

0.5 seconds.

Immersion of the pin in flux 5

seconds

solder wetting

immersion area must be

shows no voids, pin holes.

right

welding heat

place the connector on the PCB, and then

Immerse the welding pin

the surface of the plate in the solder groove

10 seconds.

1. No deformation or oversize

lossen.

2, meet the electrical characteristics.

Drop Test

drop 800mm, 10~20kg under 600mm, according to a corner, three lines, six sides at least 10 times The packaging box shall not be damaged or severely deformed, the internal product packaging shall be intact, the appearance and structure of the material shall be intact, without deformation, wear, cracking and other problems, and the electrical, mechanical and environmental properties shall be normal;

heat resistance

After the connector is exposed to a constant temperature and humidity bath at 85±2°C for 96 hours, and then naturally dried at room temperature for 2 hours, the insulating part should be free of deformation and scratches, and the metal part should be free of discoloration.

Appearance: no obvious damage

Appearance Configuration

hardy

After the connector is exposed to a constant temperature and humidity bath at -40±2°C for 96 hours, and then naturally dried at room temperature for 2 hours, the insulating part should be free of deformation and scratches, and the metal part should be free of discoloration.

Appearance: no obvious damage

Appearance Configuration

 

 

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 

 

Certificate

 

RJ45 specification. Pdf